DMC-8800

Professional Digital Matrix audio processor with AEC

The SOUNDVISION DMC-8800 audio processor is a freely designed audio processing and control system. It adopts advanced DSP processing technology, has a new automatic mixing, Feedback elimination, etc., targeted to solve various practical problems in the application scene.

The built-in Dante module provides a high bandwidth, low latency, high compatibility, and low-cost solution for network audio transmission. Because most of the controls are handled by software, it looks much simpler.

The operators only need to click the mouse gently, no longer like before, that adjust the complex large mixer in the field to complete the function conversion. DMC-8800 simplify the operation difficulty greatly.

 

VERIFICATION OF COMPLIANCE :CE-H36-W67ROSH-H36

FEATURE

  • Professional digital feedback inhibition module, through / feedback mode can be Convertible, with a key to  microphone calibration function.
  • USB Background music playback and recording function.
  • Support smart phone, tablet, laptop control and distributed cloud control.
  • DSP audio processing, built-in automatic mixer, optional feedback elimination,
  • echo elimination, noise elimination module.
  • 5 stage parameter equalization.
  • Input per channel: Front stage amplifier, signal generator, expander, compressor,
  • Output per channel: 31 Section diagram equalizer, delay device, frequency divider, limiter.
  • Full function matrix remix.
  • Built-in automatic camera tracking function.
  • Support for scenario presets.
  • Automatic memory protection when power off.

SPECIFICATIONS

Model DMC-8800
DSP Processing 456MHz
Number of analog channels 8 Input + 8 Output
Core Algorithm Automatic mixing, feedback elimination, echo elimination, noise elimination
GPIO 8 (Including input and output)
RS232/RS485 1
RJ45 control interface 1
USB Port 1
RJ11 phone interface 0
DANTE network interface 0
Simulated maximum gain 51dB
Digitalizing bit 24bit
Sampling Rate 48k
Frequency Response 20-20KHz ±0.2dB
Analog-to-digital dynamic range (A-weighted) 114dB
Digital-to-analog dynamic range (A-weighted) 120dB
Input to output dynamic range 108dB
Total harmonic distortion + noise <0.003% @1KHz ,4dBu
Floor noise (A- weighted) -90dBu
Delay storage 2s
Analog input to output system delay 3ms
Input impedance (balance -type) 20KΩ
Output impedance (balance -type) 100Ω
Maximum Input Level +18dBu, balance
Maximum Output Level +18dBu, balance
Equivalent input noise EIN (A-weighted) 20-20kHz  ≤ -131dBU
Phantom power (per input) 48V
Input common mode rejection 70dB @80Hz
Channel Isolation, 104dB @1kHz
Power Consumption <40W
Operating Temperature -10-70°C
Working Power Supply AC 110V – 220V, 50Hz/60Hz
Dimensions (W x D x H) 482*258*45 mm
Weight 3Kgs

DIAGRAM

DOWNLOAD

This website uses Cookies, We use Cookies to personalize content and give you the best experience on our website. For more detailed information see our ‘Cookies Policy’.

More info Accept